Artesyn System Services Framework Installation and Use (November 2014) - Manual (Page 72)

Accessing SSF
System Services Framework Installation and Use (6806800S58E) 72
4. Keep the secure ssh connection open in y.y.y.y and open another shell in the same
machine. After that run the following command to access the SSF using CLI.
$ telnet localhost <un-used port number>
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1)
Escape character is '^'].
List of licensed shelf moids are below.
1-1 Read write access License for 90 days evaluation
No access is allowed for registered shelfs with no license
Welcome to the Artesyn's SSF CLI
5. Type username and password.
Username: Admin
Password:
Access granted
>enable
#configure terminal
SSF(config)#
For more information about the commands, refer Command Line Interface Usage manual.
5.4 Accessing SSF using XML Interface
The XML interface of SSF , passes management requests to the SSF framework for processing.
It also handles responses and notifications/events from the SSF framework.
The XML SSF interface facilitates access to SSF using an XML-based request protocol. The XML
SSF interface is intended for remote configuration of software and scripts. It can also be used
via a remote GUI configuration tool. The XML-based requests are sent over a persistent
connection to the XML
SSF agent, which processes the requests and returns XML-based
responses. SSF also sends asynchronous responses/events over the XML interface such as HPI
alarm notifications etc. By default, these events are disabled.
For more details on SSF XML interface, refer System Services Framework XML Interface Guide.