4 installing ssf application agent, Ssf installation – Artesyn System Services Framework Installation and Use (November 2014) User Manual
Page 48
SSF Installation
System Services Framework Installation and Use (6806800S58E)
48
3.3.4
Installing SSF Application Agent
To manage applications (ViewCheck and SRstackware
TM
) using SSF, user needs to install SSF
Application Agents at corresponding blades. For example, to manage SRstackware on ATCA-
F140, you must install SRstackware agent for ATCA-F140 on the blade.
Following is the procedure for installing application agent on a blade:
1. Copy the following RPM to the blade where the SSF Application Agent needs to be
installed:
ssf_<Application Agent>_rel-<Blade>-<version>.<arch>.rpm
2. Run the following RPM command:
rpm -ivh ssf_<Application Agent>_rel-<Blade>-
<version>.<arch>.rpm
/opt/ssf/etc/conf
ig/bcsim/
Contains SSF-BCSIM
configuration files. For more
information, see
.
FUF.conf
SMAN.conf
ssfApi.log
scpExpectScript
ssfApi.conf
ssf_bcsim_instances
ssf_bcsim_location
/opt/ssf/lib/
Contains shared libraries used by
the SSF executables.
libSMAN.so
Table 3-5 Directory Structure of Blade SSF Core (continued)
Folder
Description
Files
Before installing Blade SSF Application Agent, it is recommended to uninstall the BSF RPMs,
if any.