Avalon Firestyles 900 PI-1992 - Manual (Page 39)

PAGE 39
Problem Possible Cause Don't Call for Service
Until You Check
Starting appliance on
"HIGH BURN" range.
Combustion air inlet blocked.
Door ajar.
Ashpan open or ajar.
Firepot not in correct position.
Lack of ignition.
Firepot overfills on start-up.
Start-up fire extinguishes
itself.
Restriction in combustion intake tube.
Door or ashpan open or ajar.
Firepot plugged.
Lazy orange flame,
smoking exhaust or firepot
overfills with pellets. Combustion tube intake is not blocked.
Door and ashpan are latched.
Firepot is clean.
BEFORE CALLING FOR SERVICE
Burn rate control is set to the "OFF"
position.
Inlet tube is not blocked outside house.
Door is latched securely.
Ashpan is latched and sealed.
Firepot is in correct position.
Ensure firestarter is ignited.
SAVE TIME AND MONEY - CHECK THIS LIST BEFORE YOU CALL FOR SERVICE.
To eliminate unnecessary service calls, first read all the instructions in this manual carefully. The following checklist
provides possible solutions to common occurrences that are not the result of defective workmanship or materials in
this appliance. Always make sure unit is plugged in and that the circuit breaker has not tripped.
If you do have a problem that you cannot fix yourself, call the dealer where you purchased your appliance. When
calling, have this manual handy with the model, serial number and purchase date of your appliance.