Avalon Firestyles 900 PI-1992 - Manual (Page 40)

PAGE 40
Problem Possible Cause Don't Call for Service
Until You Check
Auger is primed.
Hopper has pellets.
Start switch is pressed and amber
indicating light is on.
Power switch is "ON".
Appliance is plugged into outlet.
Circuit breaker or fuse has not
tripped.
Remove pellets from hopper and
check for foreign objects jammed in
auger flights.
Pellets not feeding.
BEFORE CALLING FOR SERVICE (Cont.)
Incorrect air control setting.
Exhaust duct restricted.
Fuel.
Power outage.
Restricted exhaust.
Fire smolders. Firepot overfilled.
Pellets are wet.
Refer to previous check items.
Pellets in hopper are dry and all
stored pellets are dry.
Lazy orange flame,
smoking exhaust or firepot
overfills with pellets. (cont.) Air control is set to suit burn rates.
(Open control until fire brightens up).
Flyash buildup behind exhaust ducts is
removed.
Fuel is not poor quality or wet.
Unit has power.
Exhaust is not restricted.
Auger not primed.
Hopper empty.
Start switch not pressed.
Power switch not "ON".
Appliance not plugged into power
outlet or no power available at
outlet.
Auger flight jammed by foreign
object.