Bolide SVR9004HD - Manual (Page 19)

User Manual
15
5.3.1.2 Output mode
Go to [Main menuDisplayOutput] to enter into the output set interface shown as Picture 5-5.
 Video output: Support CVBS output Live and Spot mode simultaneously, and Live is main output, and
Spot is auxiliary output (only for SVR9016HD)
 View Setup(CH Sequence): the option is defaulted to “Off” and sequence time is 5 second. User can
activate the option as per request.
 SEQ time: allow you set sequence time, and minimum time can be set to 1 second.
VGA/HDMI Resolution: allow you select VGA or HDMI output, including 800x600, 1024x768, 1280x1024,
1440x900 and 1920 x 1080.
 Transparency:
allow you adjust menu’s transparency, and its range is 1~128.
 Margin: allow you adjust the whole screen’s margin. Details operations please refer to the Picture 5-7.
Volume: allow you adjust the DVR volume shown as Picture 5-8.
5.3.1.3 Privacy Zone
The function Allow you setup privacy zone parameters according to Picture 5-9. Each channel could set
up to four privacy zones, and please follow below steps to set:
1. Select the area no (Area 1 ~ Area 4);
2. Click [Setup] to adjust position of mask area;
3. After finishing position adjust, click right key of mouse to return back [Privacy zone] interface;
4. Click [Apply] to save the above setting.
Picture 5-9 Picture 5-10
Picture 5-7
Picture 5-8
Picture 5-5 Picture 5-6