Cadac CDC four - Manual (Page 37)

Revision 1 2012-13 CDC FOUR
37
LIM – non-operative for input channels.
Mute and Solo:
SOLO – routes the signal in the channel to the internal PFL or AFL busses,
to permit the signal to be monitored without otherwise interrupting the mixer’s
routings. The operation of the Solo system is controlled from the Solo Logic
section, see “Solo control” on page 63.
MUTE – mutes the signal in the channel. Note that all Aux. Sends are also muted,
but Insert Sends and Direct Outs remain active.
Note that the CAM’s MUTE and SOLO buttons have exactly the same function
as the fader block MUTE and SOLO buttons for the channel currently assigned
to the CAM (i.e., those immediately below whichever SEL button is currently
illuminated).
SOLO
MUTE