Cadac CDC four - Manual (Page 9)

Revision 1 2012-13 CDC FOUR
9
consoles. All the functions of the single, assignable, largely-standard channel strip
are duplicated on the high-resolution TFT colour display, allowing the engineer to
use either “conventional” controls or operate the mixer mainly through the display.
The CDC FOUR has a rear panel expansion port which can be fitted with a
dedicated CADAC multichannel digital interface for use with the optional CDC
RACK stagebox.
CDC FOUR – Main Feature Set
• 16 mic/line inputs
• 8 stereo inputs
• 4 group outputs plus stereo main output
• 8 VCA groups
• 8 aux sends
• 2 internal FX processors
• 4-band parametric EQ on all channels and groups
• Variable-frequency HPF on all channels
• Dynamics section (compressor/limiter plus gate) on all channels
• Adjustable per-channel delay
• Inserts and Direct Outs on all channels
• Fully-featured Monitor, PFL and Talkback sections
• Internal Universal PSU
• 7” 800 x 480 pixel TFT display
• Scene automation, with 100 mm motorised faders
• 96 kHz, 24-bit Delta-Sigma AD and DA convertors
• Fourth generation 32/40-bit floating-point SHARC processors
• Low-noise, wide dynamic-range analogue mic pre-amps with gain controls
• Channel functions controllable either from standard channel strip or via
display
• Dedicated hardware bargraph meters on each input and stereo main output
• Global metering display
• Dynamics gain reduction displays
• Optional interface card for the CDC RACK expansion stagebox
• Optional remote stageboxes (32-in/16-out or 32-in/8-out) with proprietary
interface
• Optional rackmount kit
• Gooseneck console lamp
• No fans – silent in operation