Cadac CDC four - Manual (Page 52)

52
Revision 1 2012-13 CDC FOUR
As with the CHN page, the arrow keys may be used to navigate the cursor around
the page, and the ADJUST knob used to set the routing to the L/R and Group
busses, and to adjust Aux Send or FX Send levels. This is a useful feature as
it permits send levels to be set for multiple channels without assigning them
successively to the CAM.
Similar pages are presented for the CHNS 17-32 and CHNS 33-48 layers,
providing that a CDC RACK stagebox is connected. If the ST CHNS VCA layer is
active, the Routing page shows the routings for the eight stereo channels:
If the OUTPUTS layer is active, the Routing page shows the routings for Groups
1 to 4 and the two FX channels FX1 and FX2:
Note that this page displays the reduced set of routings that are permitted for
outputs; Groups can only be routed to the main stereo output, FX return channels
cannot be routed back to themselves, and Aux channels have no routing
possibilities at all, and are thus not included on the page.