Cybex 625T Treadmill - Manual (Page 29)

2. Unscrew the coax cable from the Broadcast Vision television.
Qty. Description
1
Coax cable, from cable
provider
1
1 Coax cable filter 2
1 Coax cable, 6” 3
1 Broadcast Vision television 4
3. Install the coax cable filter to the coax cable from cable provider.
4. Install the 6” coax cable to the coax cable filter.
5. Install the 6” coax cable to the Broadcast Vision television.
6. Turn the Broadcast Vision television on.
7. Plug Cat6 cable from Broadcast Vision into coupler on Cybex product.
8. Select C.A.B. (Console Adapter Box for Broadcast Vision) when setting up A/V options.
Power cord management
Power cord retaining brackets are located under the front end of the unit. This allows any extra length
of the power cord to be stored under the front end of the unit.
Tools Required:
Wire tie (2)
Shock and electrocution hazard.
• Route power cord so it does not become damaged.
• Do not allow cord to be pinched or interfere with movement of treadmill.
1. Connect the main power cord into the power outlet.
2. Press Quick Start and raise the elevation to maximum incline.
3. Toggle the on/off (I/O) power switch to the off (O) position. The on/off (I/O) power switch is located
under the front end of the unit, or on the front right side panel.
Qty. Description
1 Front right side panel location 1
1 Under the front end location 2
4. Unplug the main power cord from the power outlet.
Page 29 of 88
Cybex 625T Treadmill Part Number LT-23221-4 H