Cybex 625T Treadmill - Manual (Page 30)

5. Wrap the power cord around the outer power cord retaining brackets to desired length.
Qty. Description
1 Power cord 1
1
Power cord retaining bracket,
Inner
2
2
Power cord retaining brackets,
Outer
3
The power cord can be routed with full or half wraps around power cord retaining brackets. The
power cord can then exit to the left or right of the treadmill.
Qty. Description
1 Power cord 1
1 Half wrap 2
1 Full wrap 3
1 Exit left or right 4
6. Plug the main power cord into the power outlet.
7. Toggle the on/off (I/O) power switch to the on (I) position.
8. Press Quick Start and operate the elevation through full incline. If power cord is too short or interferes
with the movement of the treadmill, change the wrap of the power cord.
9. Secure the power cord with two wire ties.
Qty. Description
1 Power cord 1
2 Wire tie 2
Setup
Use the following instructions to setup the unit.
Falling hazard. When starting unit
• Stand on two top steps.
• Do not stand on belt.
Page 30 of 88
Cybex 625T Treadmill Part Number LT-23221-4 H