Cybex 625T Treadmill - Manual (Page 33)

Set beeper and volume levels.
Console beeper - On or Off.
Headphone beeper - Off, Some, or All.
Default volume - Range is 0 to 30, 10 is default.
Volume (VOL)
Set E3 View Monitor language. Standard languages available. English (Default). Languages
Reset setup options to default values
Reset LED console
1.
Press the Scan/Hold or Display Option key at the first setup option screen (Time).
The console will display RESET and [dEFA][ULtS] [? ].
To exit without resetting, press the ENTER key.
2.
Press the UP or DOWN keys to select YES.
3.
Press the ENTER key to reset the console to the default values.
The console will beep twice and display RESET and [dEFA][ULtS] [Set].
Reset E3 View Monitor
1.
Press the Scan/Hold or Display Option key at the first setup option screen (Time).
The console will display RESET and Reset Defaults? NO.
To exit without resetting, press the ENTER key.
2.
Press the UP or DOWN keys to select YES.
3.
Press the ENTER key to reset the console to the default values.
The console will beep twice and return to setup mode.
Exit Set Up mode
Press the STOP key to exit Setup options.
A/V Configuration and FM Radio Presets
Perform this procedure if the unit includes the optional Wireless Audio Receiver Module.
Tools Required:
Page 33 of 88
Cybex 625T Treadmill Part Number LT-23221-4 H