Time and date confirmation, Setup options – Cybex 625T Treadmill User Manual

Page 31

Advertising
background image

Cybex recommends that the treadmill be unplugged or the on/off (I/O) power switch turned off (O) when
it is not in use.

1. Without anyone on the treadmill, plug the power cord into a power outlet from a grounded, dedicated

circuit.
Ensure the power cord is not being pinched under the front of the treadmill.

2. Toggle the on/off (I/O) power switch to the on (I) position. The on/off (I/O) power switch is located

under the front end of the unit, or on the front right side panel.

3. The control panel will light up.

Time and Date confirmation

The first time the unit is turned on, it prompts the user to confirm the current Time and Date. Quick Start,
Workouts, Setup or Stop will skip this requirement but it will appear again the next time the unit is
powered up until the time and date are properly set.

1.

Press the ENTER

key to begin editing the time, starting with the hours (HH) and then minutes

(MM) and then AM/PM/24.

2.

Press the UP

and DOWN

keys to select the hour.

3.

Press the ENTER

key to accept and begin editing the minutes.

4.

Press the UP

and DOWN

keys to select the minutes.

5.

Press the ENTER

key to accept and begin editing the AM/PM/24 hour setting.

6.

Press the ENTER

key to accept time.

Continue this procedure for the Date. Date format is [YYYY] [MM] [DD]. Y - Year, M - Month and D
- Day.

7.

Press the ENTER

key after the final setting for Day. The opening screen will now be displayed.

Time and Date confirmation complete.

Setup options

1.

Press and the hold the Scan/Hold

or Display option

and UP

keys for 3 seconds.

2.

Navigate through the setup menu with the UP

and DOWN

keys.

3.

Press the ENTER

key once to enter setup values. Press again to save any changes and

advance forward in the menu.

Page 31 of 88

Cybex 625T Treadmill Part Number LT-23221-4 H

Advertising