Daktronics All Sport 3000 Series - Manual (Page 20)

Basic Operation 2-7
Single Controller Systems Channel Setting
Typically all Single Controller systems will use the default setting BCAST = 1,
CHAN = 1. All radio receivers must be set with a switch setting of 1 with the
Broadcast 1 (BCAST 1) jumper set.
If you suspect interference from a nearby Daktronics system, press <CLEAR> at the
“RADIO SETTINGS” prompt to change the channel number.
Typically all Multiple Controller systems will use channel 1 for the first controller.
All other controllers will use sequential channel settings (2-8). The table below
describes broadcast channel and channel settings.
LCD Display Action
The LCD will toggle these
screens.
The bottom line shows default
settings.
RADIO SETTINGS
BCAST Y CHAN XX
Enter to accept
Clear to modify
bcast group 1
Radio Chan 01
The LCD shows the current radio settings along with a
prompt to accept or modify these values.
If the radio settings are correct, press <ENTER>
If these values are incorrect, press <CLEAR>
If <CLEAR> is pressed to modify the radio settings, the
LCD at the left is shown, allowing edit of the Channel or
Broadcast group setting.
Edit the Broadcast Setting. Use the number keys to enter the
desired broadcast group and press <ENTER> to accept.
Broadcast Group Setting
Use this setting for all single controller systems
The asterisk will move to the channel setting. Use the
number keys to edit this value and press <ENTER> to
accept. Edit the channel number to the desired value and
press <ENTER> to accept.
Channel Setting
Channels that may be used with broadcast channel 1. The
channel switch on the receiver must match this value and
only the Broadcast 1 (BCAST1) jumper must be installed.
Multiple Controller with Single Broadcast Group Channel
Setting
Typically all Single Controller systems will use Broadcast 1 and Channel 1 for the
first controller and Channels 2-8 for all remaining controllers. All radio receivers
must be set with a switch setting corresponding to the console controlling the
scoreboard and a Broadcast 1 (BCAST 1) jumper set.