Datatek IPv6 Transformer User Manual - Manual (Page 23)

S E C T I O N 3 P H Y S I C A L S E T U P
23
Setting proxy link-local address ...done
Configuring address pool...done
Configuring IPsec ... done
*** Datatek IPv4-IPv6 Transformer Version 4.0.0
Disk 093010.2 made by v6adm
Build 093010.1 made by v6adm
Copyright (C) 2010 Datatek Applications Inc. All rights reserved.
Code imported from m0n0wall:
Copyright (C) 2002-2005 by Manuel Kasper. All rights reserved.
Initial GUI IP address: 172.31.0.1
Port configuration:
LAN -> sis1
WAN -> sis0
FreeBSD/i386 (skf.local) (console)
If the console messages do not look like the messages above, but instead look like the following,
then make sure the Compact Flash is plugged in all the way.
0:19:0 0E11 A0F8 0C031008 0117 0280 08 38 00 A0003000 00000000 11
1 Seconds to automatic boot. Press Ctrl-P for entering Monitor.
NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03
Copyright (C) 2002, 2003 National Semiconductor Corporation
All rights reserved.
Pre-boot eXecution Environment PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
CLIENT MAC ADDR: 00 00 24 C4 F9 4C
PXE-E53: No boot filename received
PXE-M0F: Exiting MacPhyter PXE ROM.
No Boot device available, enter monitor.
comBIOS Monitor. Press ? for help.
> R