Datatek IPv6 Transformer User Manual - Manual (Page 35)

S E C T I O N 8 W E B G U I S Y S T E M
35
Hostname
This is the name of the Transformer.
Domain
This is the domain of the Transformer.
DNS servers
This is the IP address of the DNS Server, both a primary and secondary are allowed. When the
Transformer receives a DNS lookup request for a hostname from the IPv4 legacy device the
request is turned into a request for an IPv6 address and is sent to the DNS Server. The IPv6
address received from the DNS Server is then mapped to a dynamic IPv4 address. The
dynamically bound IPv4 address is returned to the IPv4 legacy device as the response to its
original lookup request.
Username
This is the login name of the administrator. It is the same as the Username in the popup
authorization dialog that appears when one first connects to the webGUI.
Password
To change the current password, type in a new password. It is the same one that is used in the
authorization dialog that appears when one first connects to the webGUI.
Passwords must conform to the following rules:
Passwords must have at least 10 case-sensitive characters.
Passwords must have a mix of uppercase letters, lowercase letters, numbers and special characters.
Passwords must have at least two characters from each of the afore-mentioned four types of
characters.
For example:
x$T1lTBn2! is a valid password.
Mv4*mabc3Z is invalid because it only has one special character.
Mv4**abc3Z is valid.
New passwords must not be reused from any of the previous ten passwords.
Automatic expiration of passwords is not supported at this time.