Datatek IPv6 Transformer User Manual - Manual (Page 26)

S E C T I O N 5 W E B G U I I N T E R F A C E
26
5 WebGUI Interface
The Transformer provides a web server to support configuration and management through any
standard web browser such as MS Internet Explorer, Mozilla Firefox, etc. The webGUI can be
accessed from either the IPv4/Host or the IPv6/Network interfaces.
1. Start a web browser.
2. In the http box, enter the IPv4 or IPv6 address that was configured on the
Transformer’s Host or Network interface as the address to which the web browser
must connect.
IPv6 addresses must be enclosed in brackets, e.g. http://[2002::2].
3. The default user name is “admin” and the default password is “mono”. The default
login and password should be changed after logging in the first time. See General
Setup page to configure new login and password.
Passwords must conform to the following rules:
a. Passwords must have at least 10 case-sensitive characters.
b. Passwords must have a mix of uppercase letters, lowercase letters,
numbers and special characters such that at least two characters from each
of the afore-mentioned four types of characters are present.
For example: x$T1lTBn2! is a valid password.