Datatek IPv6 Transformer User Manual - Manual (Page 48)

S E C T I O N 8 W E B G U I S Y S T E M
48
Enable DHCPv6 client on network-side interface
This checkbox is selected to enable the Transformer to act as a DHCPv6 client.
Only exchange informational parameters
This checkbox is selected to receive only the informational parameters that appear below. That is,
the DHCPv6 server is to serve IPv6 addresses as well as the informational parameters described
below to the Transformer.
Send Rapid-Commit option
This checkbox is selected for the Transformer to send DHCPv6 messages with the Rapid
Commit option.
Request a list of Domain Name Servers
This checkbox is selected for the Transformer to request a list of DNS addresses from the
DHCPv6 server.
Request a DNS search path
This checkbox is selected to request a DNS search path by domain name from the DHCPv6
server.
Request a list of NTP server addresses
This checkbox is selected to request a list of NTP server addresses from the DHCPv6 server.
Transformer DUID
Change the DHCP Unique Identifier (DUID) of the Transformer to a DUID by which the
DHCPv6 server knows the Transformer. A default DUID is automatically created at boot time
and displayed in this field.
Device DUID
Change the DHCP Unique Identifier (DUID) of the legacy IPv4 device to a DUID by which the
DHCPv6 server knows the legacy device. A default DUID is automatically created at boot time
and displayed in this field.