Digi-Star RF DataLink Operators Manual - Manual (Page 22)

RF DataLink
16
Print Mixer Load Sheet
To set the Print Load Sheet Selection, from the main menu select Systems, Defaults, and
then the mixer loading tab.
This selection determines whether a Load Sheet will be printed for each load sent to the EZ
Indicator in your mixer. The Load Sheet contains the ration loading and pen feeding
information as loaded into the EZ Indicator.
This setting is typically set to [No].
Note: You must have a printer connected to the PC running the RF DataLink in order to use
this setting. If you select [Yes] and do not have a printer connected, the RF DataLink
program will not process another load until you either connect the printer or change the
setting to No.