Digi-Star RF DataLink Operators Manual - Manual (Page 5)

Operators Manual
D3664
RF DataLink Setup 1
Sequence of Operations .............................................. 1
Registering the Software.............................................. 1
Radio Installation and Setup ........................................ 1
Radio Antennas ........................................................... 2
Fresnel Zone................................................................ 3
Radio Interference ....................................................... 3
Standard Range Setup ................................................ 3
Extended Range Setup................................................ 4
USB Black Box Installation .......................................... 5
Passwords ................................................................... Error! Bookmark not
defined.
Entering Mixer Data ......................................................... 5
Adding Mixers .............................................................. 5
Defaults ............................................................................ 7
Determining the System Defaults. ............................... 7
Defaults – Processing Design ...................................... 7
Modes .......................................................................... 7
Auto ............................................................................. 7
Interactive with Mill ...................................................... 7
Loads Made by Bunk Reader ...................................... 8
Stationary List, Truck Loads ........................................ 8
Bunk Reader All Mixers ............................................... 8
Auto Start Processing .................................................. 8
Verify Ingredient Checksum......................................... 8
Weigh Units ................................................................. 8
Archive Data ................................................................ 8
Defaults - File Directories............................................. 8
Make As Fed Data File ................................................ 9
Defaults - Pen Feeding ................................................ 10
Base Radio Type ......................................................... 10
Radio Test Mode ......................................................... 10
Defaults – Pen Feeding ............................................... 11
Pen Delivery Mode....................................................... 11
Resizing at Scale (Send 95% of Capacity) .................. 11
Optimize Load to Pens/Optimize-Split Pens ................ 11
Find Pens to Fit............................................................ 12
Defaults – Feed Tolerances......................................... 13
Split Load Minimum Balance ....................................... 13
Pen Delivery Validate Tolerances ................................ 13
Auto Add Pen Back on List to Feed ............................. 14
Defaults – Mixer Loading ............................................. 14
Determining Load Size for the Mixer............................ 14
Feedings To Mixer ....................................................... 14