Digi-Star EZII Escape Computer Command Set - Manual (Page 19)

EZII Escape Computer Command Set
19 D36 48 Rev G November 30, 2009
26 "SCLABC" (Continued)
calibrations ( which can take up to three seconds ). The weight sent at this time is the same weight prior to internal temperature
calibrations. This occurs every 20 minutes but is done several times during the first 20 minutes after power up.
Print example: Scales A & B with scale B selected at the indicator. Both scales are being calibrated.
1 2 3
123456789012345678901234567890
" 280LB GC,> 11300LB NC"
The weight will appear as " 999999" with the “ES” weight tag when the operator is in the Short or Long Form Menu’s.
Print example: Scales A & B with scale B selected at the indicator. The B scale is in setup.
1 2 3
123456789012345678901234567890
" 280LB GR,> 999999LB ES"
The weight will appear as " 999999" with the “ER” weight tag when weighing errors (+/- RANGE,CHK AD,OVERCAP etc..)
are detected by the scale.
Print example: Scales A & B with scale A selected at the indicator. The B scale has an error.
1 2 3
123456789012345678901234567890
"> 280LB GR, 999999LB ER"