Digi-Star EZII Escape Computer Command Set User Manual
Page 23
EZII Escape Computer Command Set
23
D36 48 Rev G
November 30, 2009
Rd - Upload Feedline Command:
This command allows a feedline to be uploaded into the EZ 3500 memory using the Computer Interface.
This command includes the following information:
Start new command:
<ESC>
Command identifier:
Rd
Data Field Format Text:
Sent exactly as shown below.
End of command:
<EOT>
Upload Feedline Command Response:
If the command is completed successfully, then the <ACK> (Hex value 0x06) character will be returned. If the command fails, the <NAK> (Hex
value 0x15) character will be returned.
Below is an example feedline (the "quotes" are not part of the string). The leading and trailing "Control Codes" are shown as '*'. See "Feedline
with Control codes & Check Sum:" for more details.
"*Rd*000001,U,I,T,1001,CORN ,HICOW , 2500, , 7350 , , , , 250, , , , , 0, 0**CK*"
The complete Upload Feedline command is shown again with the control codes added to help indicate the data field column and length details.
0 10 20 30 40 50 60 70 80 90 100 110
1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678
*Rd^000001,U,I,T,1001,CORN ,HICOW , 2500, , 7350 , ,0, , 250, ,1, 5, , 0, 0*@C*
| | ||||
| | |||<EOT>
| <STX> |||CkSum
<ESC> ||<ETX>
|<CR>
Each Feedline Data Field is explained below.