Digi-Star EZII Escape Computer Command Set - Manual (Page 26)

EZII Escape Computer Command Set
26 D36 48 Rev G November 30, 2009
Example EZ 3500 Feedline Data:
The information used by the EZ 3500 is referred to as the "feedline". Recipes are made up of several feedlines (see example #1).
Example #1. Sample Data Fields of unused feedlines for the EZ 3500:
(Control codes not shown-see "
Feedline with Control codes & Check Sum: " for more details)
000001,U,I,T,1001,CORN ,HICOW , 2500, , 7350 , , , , 250, ,1, , , 0, 0
000001,U,I,T,1001,MILLMX,HICOW , 1200, , 7350 , , , , 250, ,1, , , 0, 0
000001,U,I,T,1001,GHAY ,HICOW , 2000, , 7350 , , , , 250, ,1, , , 0, 0
000001,U,I,T,1001,HIMIN ,HICOW , 200, , 7350 , , , , 250, ,1, , , 0, 0
000001,U,P, ,1001,101 ,HICOW , 3000, , 7350 , , , , 127, ,1, , , 0, 0
000001,U,P, ,1001,103 ,HICOW , 2900, , 7350 , , , , 123, ,1, , , 0, 0
Several areas are left blank. These fields will be filled in by the EZ 3500 as the operator loads or unloads the mixer (see example #2).
Example #2. Sample of completed Feedline Data Fields from EZ3500:
(Control codes not shown-see "
Feedline with Control codes & Check Sum: " for more details)
NEW EZ,D,I,T,1001,CORN ,HICOW , 2500, 2490, BNC,10:08,0,06-24-01, 250, ,1, , 2490, 0, 0
NEW EZ,D,I,T,1001,MILLMX,HICOW , 1200, 1200, BNC,10:12,0,06-24-01, 250, ,1, , 3690, 0, 0
NEW EZ,D,I,T,1001,GHAY ,HICOW , 2000, 2040, BNC,10:19,0,06-24-01, 250, ,1, , 5730, 0, 0
NEW EZ,D,I,T,1001,HIMIN ,HICOW , 200, 210, BNC,10:21,0,06-24-01, 250, ,1, , 5940, 0, 0
NEW EZ,D,P, ,1001,101 ,HICOW , 3000, 3020, BNC,10:30,0,06-24-01, 127, ,1, , 8960, 0, 0
NEW EZ,D,P, ,1001,103 ,HICOW , 2900, 2920, BNC,10:36,0,06-24-01, 123,- 100,1, , 11880, 0, 0