Digi-Star EZII Escape Computer Command Set - Manual (Page 9)

EZII Escape Computer Command Set
9
D36 48 Rev G November 30, 2009
Gk - Keyboard Lock Command:
This command is very powerful and can disable all or only a few keys on the EZ indicator.
This command includes the following information:
Start new command: <ESC>
Command identifier: Gk
Code for Enabled key: 'L', 'U' or 2 digits - L= Lock or disable all keys, U=Unlock or enable all keys
or XX = enables the key associated with the key code from the table below.
End of command: <EOT>
Keyboard Lock Command Response:
If the command is completed successfully, then the <ACK> (Hex value 0x06) character will be returned.
If the command fails, the <NAK> (Hex value 0x15) character will be returned.
Keyboard Lock Command Example:
The following command string:
<ESC>GkL<EOT>
would disable all keys.
The following command string:
<ESC>Gk23<EOT>
would enable the Print key.
Up to 20 keys can be enabled after the Lock command has been sent.
Key Code Table:
M+ . . . . . . . . . . = 42
RM . . . . . . . . . = 32
ID . . . . . . . . . . = 12
Zero . . . . . . . . = 43
Print . . . . . . . . = 23
Help . . . . . . . . = 13
Timer . . . . . . . = 47
Tare . . . . . . . . = 40
Load/Unload . . = 30
Hold . . . . . . . . = 20 Net/Gross . . . . = 10
Ingr/Pen . . . . . = 41
Recipe . . . . . . = 31
Bunk +/- Read . = 21
On . . . . . . . . . . = 08
Select . . . . . . . = 27
Function . . . . . = 37
Clear . . . . . . . . = 17 1 . . . . . . . . . . . = 34
2 . . . . . . . . . . . = 45
3 . . . . . . . . . . . = 35
4 . . . . . . . . . . . = 25
5 . . . . . . . . . . . = 15
6 . . . . . . . . . . . = 14
7 . . . . . . . . . . . = 46
8 . . . . . . . . . . . = 36
9 . . . . . . . . . . . = 26
0 . . . . . . . . . . . = 16
The Message command can be used with the Keyboard Lock command to instruct the operator to "PRESS
THE PRINT KEY WHEN FINISHED". All keys will perform there proper function except the ON key.
Pressing the key will simply return the unit to weighing.