Digi-Star DataLink - Manual (Page 21)

Operators Manual
D3664 17
Pen Feeding
Pen Delivery Mode
To set the Pen Delivery Mode, from the main menu select Systems, Defaults, and then the
Pen Feeding tab.
Single Pen – this mode will send a single pen load at a time to the
mixer. One pen, one load. This mode can be used of your mixer is
undersized for your operation and cannot hold enough feed to
process more than one pen at a time. This mode is least efficient.
Multiple Pens – this mode will send multiple pens to your mixer based on your mixers size
and how much of a particular ration it can hold. Multiple pens, one load. This mode is most
efficient and is the typical setting for most installations.
Optimize Load to Mixer/Optimize-Split Pens
To set the Optimize/Split Pens Selection, from the main menu
select Systems, Defaults, and then the Pen Feeding tab.
This setting determines whether the RF DataLink will split pens in
order to fill your mixer to capacity. When you select [Yes], the RF
DataLink program will maximize the load in your feed mixer and
split pens as needed.
Example;