Digi-Star DataLink - Manual (Page 23)

Operators Manual
D3664 19
Mixer Loading
Print Mixer Load Sheet
To set the Print Load Sheet Selection, from the main menu
select Systems, Defaults, and then the mixer loading tab.
This selection determines whether a Load Sheet will be printed
for each load sent to the EZ Indicator in your mixer. The Load
Sheet contains the ration loading and pen feeding information as
loaded into the EZ Indicator.
This setting is typically set to [No].
Note: You must have a printer connected to the PC running the RF DataLink in order to use
this setting. If you select [Yes] and do not have a printer connected, the RF DataLink
program will not process another load until you either connect the printer or change the
setting to No.
Weigh Units
To set the Weigh Units, from the main menu select Systems,
Defaults, and then the Mixer Loading tab.
This selection sets the weigh units of the RF DataLink to either
pounds or kilograms. Be sure that the EZ indicator is set to the
same weigh units.
Determining the Load Size for the Mixer
To set the Load Size, from the main menu select Systems,
Defaults, and then the Mixer Loading tab.