Digi-Star DataLink - Manual (Page 28)

RF DataLink
24
After all the Mixers have
been checked, the RF
DataLink program will
begin making loads. It
will begin servicing the
pens in the order sent
from
the third party
software.
As the data is being
transferred to the EZ
Indicator at the Mixer, the
upper window in the
Process screen will show
the
status of the
communication. The
third window will also
display
the load
information for this
specific load.
This information includes the Mixer Number and Description, the Batch Number, Ration,
Total Call Weight, Mill Weight and Externally Loaded amount. The L refers to Loaded and
the F refers to Feeding Number. Each
of these fields are updated when the
communication is complete.
Once the communication is complete,
the bottom window will display the Pen
Numbers and the Call Weights for each
pen in this specific load. The L and F fields will be updated in the third window as well. An
X signifies that the load is complete.
The RF Datalink will now move to the next Mixer and make/send another load. Once all the
Mixers have been loaded, it will then begin to search for each of the loaded Mixers. When it
contacts a loaded Mixer that has completed its load, it will download that data from the EZ
Indicator and send another load.
This process will repeat until all the pens have been fed and no loading or feeding data
remains.