Honestech VHS to DVD 5.0 Deluxe - Manual (Page 31)

31. VHS to DVD 5.0 Deluxe

Audio Device 'Settings' – use this button to adjust the recording volume of the device.
Format
– specify the disc or video format your want your video to be recorded in.
See the Appendix for information regarding each format option.

Format Settings – use this button to change your video resolution in the event that you
experience unstable or choppy video.
Quality
– specify the quality setting that your video will be recorded in.
*This option, in combination with the Format option, will determine how much video can be
recorded to disc. Does not apply to VCD or SVCD Formats.
Result
– this line indicates the amount of video that can be burned to the type of disc or
video format you have selected in the Format option. This line will change based upon the
settings made for the Format and Quality options. Typically, after deciding on your format,
you can adjust the quality setting to best match the length of video you will be recording.
*If you will be recording multiple videos, choose the setting that best matches the total
amount of video you plan to burn on one disc.
Video Recording Type – specify the video standard you want your video recorded in,
NTSC or PAL. NTSC is the common video standard for North America. PAL is typically
used in Europe and British Commonwealths.
TIP: This option can also be used to convert a PAL videotape to the NTSC standard
and vice versa. See the Appendix for information on converting video types.
Output Folder
– this is the location on your computers hard drive, where all video
recordings will be saved permanently. Click the Folder icon on the right to change the
output folder location. *Changing the Output Folder location is not recommended unless
space is low on the current drive.
Make your settings based on the requirements for your recording and click the OK button when
finished to close the Record Settings control panel.