HP Velotechnik Go SwissDrive system for HP Velotechnik - Manual (Page 11)

Notes for the user
9
Note: Correct setup of the wheel
circumference is crucial for correct speed
indication (please refer to setup chapter).
The customizable area is able to show main
menu, tour data overview or stopwatch while
the bicycle is moving. The browse button
allows you to switch between the menus.
Picture 6: Main menu
Note: Correct setup of the wheel
circumference is crucial for correct speed
indication, please refer to setup chapter
"Configuration and setup options" on page
20ff.
The customizable area is able to show main
menu, tour data overview or stopwatch while
the bicycle is moving. The browse button
allows you to switch between the menus.
Menus while parking
When the bicycle is not moving additional
menus are accessible. Overall data overview, a
menu to save data to external devices, and
setup menu. The browse button allows you to
switch between the menus.
Note: Please note that the Evo display will
not show these menus while riding. In case
one of these menus is displayed when the
bicycle starts moving the main menu will
appear automatically.
Basic setup
Before the first ride with your GO SwissDrive
system some basic settings should be done.
This especially refers to setup of wheel
circumference, display language, and date and
time.
Wheel circumference
Wheel circumference is set in the System
settings of the configuration menu. The unit is
millimeters. To change the value, first use the
browse button to go to the configuration
menu. By using "+" or "-" you can now access
the System settings entry. Press the confirm
button to enter the setup screen. Then, use +
or - again to jump to Circumference. Press
the confirm button again to be able to
increase ("+" button) or decrease ("-" button)
the wheel circumference. Having finished
press the confirm button and navigate back to
the top entry and press confirm button again
in order to get back to configuration menu.
Keep in mind that the wheel circumference is
the basis for most calculations of the Evo
console, such as speed, distance, and
remaining range. If possible, have this setting
done by your specialised dealer when the
bicycle is handed over.