HP Velotechnik Go SwissDrive system for HP Velotechnik - Manual (Page 13)

Notes for the user
11
Confirm button:
Picture 9: Remote control, confirm button
The confirm button is used to
activate/deactivate various functions in the
Evo system's menu and to select and confirm
settings in the configuration menu. The
confirm button has different functions,
depending on which menu you are currently
viewing.
1. Main menu: The confirm button has no
function in the main menu.
2. Function in the trip data menu: In the trip
data menu, you can use the confirm button to
reset trip data manually. Please bear in mind
that trip data cannot be recovered once
cleared.
3. Function in the stopwatch menu: While the
stopwatch menu is displayed, one click of the
confirm button on the remote control starts
the stopwatch. Clicking the confirm button
again stops the timer. Pressing and holding
down the confirm button saves the recorded
time and the stopwatch is reset. However, if
you want to resume timing after a break,
simply briefly press the confirm button again.
4. Function in the stationary menus: In the
stationary menus, the confirm button is used
to confirm selected options or configured
parameters. After you have navigated to the
desired item using the "+" and "–" buttons on
the remote control, you can use the confirm
button to confirm your option selection or
acknowledge that you wish to proceed with
the chosen function. Examples of this include
deletion of the call list in the telephone menu
or your choice of language in the system
settings.
"+" and "–" buttons:
Picture 10: Remote control, "+" and "–" buttons
Using the "+" and "–" buttons, you can
intervene directly in the ride characteristics of
the drive system while on the move.
1. Selecting the assistance level:
Using the "+"/"–" buttons, you can choose
from five positive assistance levels and two
recuperation levels. If assistance level 0 is
selected, the motor no longer provides any
assistance. Clicking the "+" button increases
the level, while the "–" button decreases it.
The higher the assistance level is (maximum
5), the more powerful the assistance of the
motor will be up to a speed of 25 km/h.
Conversely, the recuperative effect of the
motor (recovered energy being fed back to
the battery and motor brake) is at its most
powerful in the lowest available level (-2).
2. Pushing aid:
Pressing and holding the "+" button activates
the pushing or starting aid of the
GO S
WISS
D
RIVE
motor system. This causes
the motor to operate in the absence of any
pedalling input and is intended to make it
easier for you to push the cycle on steep
ramps or if the cycle is carrying a heavy
payload. A gentle push of the cycle by hand is
necessary until the pushing aid kicks in. As