HP Velotechnik Go SwissDrive system for HP Velotechnik - Manual (Page 27)

Notes for the user
25
Table 1: Technical data of the EVO control device
Parameter Symbol Min. Typ. value Max. Unit
Temperature range in T
stg
-30 +80 °C
Temperature range in T
op
-10 25 +60 °C
Temperature range during T
ch
-10 25 +40 °C
Voltage range during USB U 4.5 5.0 5.5 V V
Amperage range during I 1.1 A
Supply voltage U
in
24 36 70 V
Weight W
h
approx. 92 g
Index of protection IP 65
should be carried out only by an authorised
specialist dealer.
Any changes or modifications to this device
could affect its electromagnetic compatibility
(EMC) and lead to undesirable consequences.
Technical data
Table 1 presents a summary of the most
important technical data relating to your Evo
control device.
Care of system components
As the central component of your
GO S
WISS
D
RIVE
propulsion system, the motor
is maintenance-free. For this reason,
absolutely no maintenance work is necessary
on your part.
The other components of your
GO S
WISS
D
RIVE
system are generally low-
maintenance, aside from the need for regular
recharging of the battery. However, you
should take care to keep it clean at all times.
In the event that your pedelec/e-bike or s-
pedelec does require maintenance, you should
have this work carried out only by a GO
SwissDrive authorised specialist dealer.
The necessary steps for cleaning and caring
for your pedelec/e-bike or s-pedelec, including
the removal of components, are described
below.
To carry out maintenance work on the
system, always disconnect the battery first by
removing the magnetic connector.
Never clean the battery using damp or even
wet substances or materials. Take care to
ensure that the contacts never become wet
or dirty.
To clean the battery and other parts of the
system, it is preferable to use a slightly moist
cloth. Avoid exposing contacts and
connectors to water.
Attention! Never use a high-
pressure cleaner or water hose to clean a
pedelec/e-bike or s-pedelec equipped with
the GO SwissDrive motor system. To
clean the system, use only a moist cloth or
sponge, but never use wet substances or
materials.
Attention! Opening the motor or
parts of the motor will void all warranties,
whether express or implied.