HP Velotechnik Go SwissDrive system for HP Velotechnik - Manual (Page 31)

29
Battery and charging
Important safety information
Attention!
Please read through these instructions
carefully before you use this rechargeable
battery. Disregard for any safety
information and instructions could lead to
product damage, electric shock, fire and/or
serious injuries.
The manufacturer accepts no liability for
defects arising from failure to comply with
these instructions.
All product information must be kept for
future information and reference.
Use the battery exclusively for your
pedelec.
Keep batteries clean and dry.
To avoid contamination of the charging
socket and contacts, e.g. by sand or mud,
do not put them down anywhere but on a
clean surface. Keep them dry.
If the battery contacts become dirty, clean
them using a clean and dry cloth.
It is recommended that batteries be
removed from devices whenever they are
not in use.
Disposal of batteries with normal
household waste is not permitted. Battery
disposal is regulated by national legislation
in the country concerned.
Hazard warnings:
Batteries must not be dismantled, opened
or crushed. Improper opening or wilful
destruction of the battery presents a risk
of serious injury. Opening the battery will
lead to voiding of the warranty.
Batteries must not be exposed to heat
sources (e.g. radiators) or fire. The effects
of external heat could cause batteries to
explode. While charging, always ensure
adequate air circulation. High temperatures
also reduce battery life.
The battery contains chemical substances
that could cause hazardous reactions if the
safety information provided here is
disregarded.
Avoid contact with any fluid escaping from
a damaged battery. In case of contact, wash
the fluid away with water. In case of
contact with the eyes or if swallowed, also
seek medical advice.