HP Velotechnik Go SwissDrive system for HP Velotechnik - Manual (Page 23)

Notes for the user
21
To change a setting in the form of a numerical
value, e.g. tyre circumference, navigate to the
desired item using the "+" and "–" buttons on
the remote control and then press the
confirm button on the remote control. You
can now increase or decrease the value by
clicking the "+" and "–" buttons on the remote
control. Each click of the "+" button increases
the respective parameter by +1, each click of
the "–" button decreases the parameter by -1.
Pressing and holding the "+" and "–" buttons
activates rapid advance mode, which remains
active until the button is released. Once you
are at the desired value, you can save it by
clicking the confirm button on the remote
control.
A detailed description of the individual
submenus is provided in the chapters that
follow.
"Systemeinstellungen" [System settings]
In the "Systemeinstellungen" [System settings]
submenu, you can change various default
settings in your system.
You can choose to have distances and speeds
displayed in metric or imperial units. In the
metric system, distances are expressed in
kilometres, and speeds in kilometres per
hour; in the imperial system, distances are
expressed in miles, and speeds in miles per
hour.
You Evo display offers various menu languages
to choose from. The selectable options
depend on the configuration implemented by
your vehicle's manufacturer. German and
English are available as standard.
With the parameter Aus nach Min [Off after
mins], you can specify how many minutes
should be allowed to elapse with no user
input or vehicle motion before the system
switches off automatically in order to save
energy. The time that you set should not be
too short, otherwise the system could switch
off unexpectedly during an unusually long wait
at a red light, for example. If the system does
switch off before you want it to, you can
reactivate it at any time simply by pressing the
On/Off button on the remote control.
With the parameter Radumfang [Wheel
circumference], you can enter the
circumference of your vehicle's tyres. The
value entered is expressed in millimetres.
Please bear in mind that the wheel
circumference is the basis for many of your
Evo system's calculations, such as displayed
speed, distance travelled and remaining range.
If possible, have this setting configured by
your specialist dealer when you collect your
vehicle.
If you activate the option Tour nach 4h löschen
[Delete trip after 4h], your trip data will be
deleted after any stop lasting longer than four
hours and data recording will restart from
zero the next time the display is switched on.
Furthermore, you can reset trip data manually
at any time from this menu by selecting the
item Tour löschen [Delete trip].
Note: The Evo display features an
integrated brightness sensor. This adapts
the backlighting of the display to the
brightness of ambient light.
"Datum und Uhrzeit" [Time and date]
In the Datum und Uhrzeit [Time and date]
submenu, you can set the current time and
date. Picture: "Datum und Uhrzeit" [Time and
date]
It is also possible to choose between 12h and
24h mode for the time format. In 12h mode,
"AM" or "PM" automatically appears after the
time in the status bar.
Bluetooth
Your Evo control device has an integrated
Bluetooth chip and can connect to compatible
devices, such as mobile phones, via Bluetooth