HP Velotechnik Go SwissDrive system for HP Velotechnik - Manual (Page 19)

Notes for the user
17
switched on. For more detailed information,
please refer to page 20 onwards in
"Configuration and setup options".
Note: Correct setup of your vehicle's tyre
circumference is crucial for a correct trip data
display. You can adapt the tyre circumference
in the setup options (please refer to setup
section).
Stopwatch
Using the stopwatch function of your Evo, you
can time how long it takes to travel a certain
distance. Each measurement records both
time and distance travelled, expressed in
kilometres.
Picture 15: Stopwatch
While the stopwatch menu is displayed, click
the confirm button on the remote control
once to start the stopwatch. Clicking the
confirm button again stops the timer. Pressing
and holding down the confirm button saves
the recorded time and the stopwatch is reset.
However, if you want to resume timing after a
break, simply briefly press the confirm button
again.
Note: Please bear in mind that only the
last two recorded times will be saved.
Whenever a new time is saved, the oldest
recorded time will be deleted.
Note: Correct setup of your vehicle's tyre
circumference is crucial for correct
measurement of distance travelled. You
can adapt the tyre circumference in the
setup options (please refer to setup
section).
Overall data overview
Picture 16: Overall data screen
When the vehicle is stationary, additional
menus are enabled so that you can find useful
information and reconfigure settings. The first
of these menus provides a compact overview
of your vehicle's performance history.