HP Velotechnik Go SwissDrive system for HP Velotechnik - Manual (Page 24)

Notes for the user
22
4.0. To find out whether your mobile phone
supports the Bluetooth 4.0 standard, please
consult the user guide for your mobile phone.
Picture: Bluetooth
To connect a compatible mobile phone, you
need to activate the Bluetooth interface of
this mobile phone first. For details, please
refer to the user guide for your mobile phone.
Next, activate the Bluetooth interface of your
Evo control device by navigating to the
Bluetooth item in the Bluetooth submenu and
pressing the confirm button on the remote
control. Then navigate to the Smartphone
item and press the confirm button on the
remote control. Both items should now be
marked with a tick. Your Evo control device
now attempts to establish a connection with a
nearby mobile phone.
To authorise the connection on the mobile
phone, open the GO S
WISS
D
RIVE
app, select
your Evo control device and confirm the
request to establish a Bluetooth connection.
Note: To be able to establish a Bluetooth
connection with a mobile phone, the
GO SwissDrive app must be installed on
this phone.
The GO S
WISS
D
RIVE
app can be downloaded
from the A
PPLE
A
PP
S
TORE
(iOS devices) or
G
OOGLE
P
LAY
S
TORE
(A
NDROID
devices)
Main menu options
Your Evo enables you to have the lower part
of the main menu show any two parameters
of your choice from the current trip data.
You can choose from distance travelled, ride
time, average consumption, average speed and
maximum speed. The parameter currently
active appears against a grey background and
is marked with a tick. To activate a different
parameter, navigate to the desired option
using the "+" and "–" buttons on the remote
control and then press the confirm button on
the remote control. If you would like to
deactivate the currently active parameter
without selecting a new one, navigate to the
active parameter using the "+" and "–" buttons
on the remote control and then press the
confirm button on the remote control. From
now on, no parameter will be shown at the
corresponding position in the main menu.
Screen selection
To give you even greater control over what
you see on your customisable display, your
Evo enables you to deactivate individual
menus completely. These screens will no
longer be displayed when you are browsing
through the menu structure.
In this way, you can personalise the amount of
information shown to suit your own
requirements. The menus currently active
appear against a grey background and are
marked with a tick. If you ever want to change
the status of a menu, navigate to the desired
menu using the "+" and "–" buttons on the
remote control and then press the confirm
button on the remote control.
Note: Please bear in mind that it is not
possible to deactivate the main menu or
the configuration menu.
Pop-ups and warnings
Your Evo uses pop-ups to inform you of
specific events and operating states. A pop-up
appears for a period of three seconds before
disappearing automatically. The meanings of
individual pop-ups are described below.
Bluetooth:
Your Evo control device has an integrated
Bluetooth chip and can connect to various
compatible devices, such as mobile phones, via
Bluetooth 4.0. Once a new Bluetooth
connection has been established, you will be
informed by a pop-up to this effect.