HP Velotechnik Go SwissDrive system for HP Velotechnik - Manual (Page 3)

1
Introduction
Dear Customer,
Thank you for having bought a HP Velotechnik bicycle or s-Pedelec
with the GO SwissDrive system. This drive system stands for high
Swiss quality and it will give you a great deal of pleasure and
enjoyment when riding due to its dynamic driving properties.
The translation of the original instruction manual for the GO
SwissDrive system contains a great deal of important and detailed
information on the proper use of the drive system, its care and
maintenance and also its technology. Please take the time to read it
through thoroughly.
Your pedelec/e-bike or s-pedelec will be given to you already fully
assembled and ready for use by your dealer. lf that should not be
the case then please contact the place from which you bought your
pedelec/e-bike.
This translation of the original instruction manual is a system manual
for your GO SwissDrive system. You can find further information
on how to handle your pedelec/e-bike or s-pedlec in your general
bicycle user manual.
If you nonetheless still have any questions that are not covered in
the translation of this original instruction manual, then please
contact your dealer.
Please keep this translation of the original instruction manual in a
safe place to answer any questions that might crop up later. Please
also make this instruction manual available if you lend or pass on
your pedelec/e-bike or s-pedelec to someone else.
We wish you a great deal of enjoyment and good riding with our
drive system.
Your HP Velotechnik Team