Kyocera DuraForce Pro - Manual (Page 129)

Connectivity 119
2. Tap Wi-Fi .
 The Wi-Fi settings menu appears.
3. If necessary, tap the ON/OFF switch to turn Wi-Fi on .
 Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.
 To disable Wi-Fi, tap the switch again .
4. Tap for the following menus:
 Add network to add a new Wi-Fi network.
 Saved networks to display the connected Wi-Fi network.
 Refresh to manually scan for available Wi-Fi networks.
 Advanced to configure advanced Wi-Fi settings, which include:
• Network notification to notify whenever a public network is available.
• Keep Wi-Fi on during sleep to stay connected to Wi-Fi when the screen goes to sleep
to conserve mobile data usage.
• Wi-Fi frequency band to specify the frequency band for Wi-Fi.
Note: Wi-Fi Direct cannot be used if you select only the 5 GHz frequency band.
• Install certificates to install the certificates for communicating via Wi-Fi.
• Wi-Fi Direct to use a peer-to-peer Wi-Fi connection. The Wi-Fi client and the hotspot
operation will be disabled while Wi-Fi direct is enabled.
• WPS Push Button to set up a Wi-Fi Protected Setup connection by pressing the set up
button on the router.