Kyocera DuraForce Pro - Manual (Page 135)

Connectivity 125
2. Tap Bluetooth .
 The Bluetooth settings open.
 Nearby devices appear in the “Available devices” list.
 If a target device is not detected, tap > Refresh to search again.
3. Tap a device from the “Available devices” list, and follow the onscreen instructions to pair with the
device.
 The Bluetooth device is paired to your phone.
 Methods to accept a Bluetooth connection differ depending on the devices used.
Unpairing from a Paired Device
1. From the Bluetooth settings menu, tap next to the paired device you wish to unpair.
2. Tap FORGET.
 The device is unpaired from your phone. To make another connection with the device, you will
need to pair again.
Connect to a Paired Bluetooth Device
You can listen to music over a Bluetooth stereo headset, or have hands-free conversations using a
compatible Bluetooth headset or car kit. It’s the same procedure to set up stereo audio and hands-free
devices.
To listen to music with your headset or car kit, the headset or car kit must support the A2DP Bluetooth
profile.
Important: Perform the pairing process at a secure location.