K-Patents PR-01-S - Manual (Page 5)

INSTRUCTION MANUAL FOR K-PATENTS PR-01-S (-AX/FM/CS) DOCUMENT/REVISION No. INM 1/14
Effective: May 15, 2009
3
2. GENERAL INFORMATION
2.1. EQUIPMENT
The K-Patents Process Refractometer consists of three parts (Figure 2.10): the Sensor (A), the Interconnecting
Cable (B) and the Indicating transmitter (C). For description of the intrinsically safe K-Patents Process
Refractometer, see Chapter 12.
Figure 2.10 Equipment
For intrinsically safe equipment, see Figure 12.10.
The K-Patents Process Refractometer provides a 4 to 20 mA DC output signal proportional to process
solution concentration. A serial output is also available as a standard.
Identification: By Serial Number (S/N) label (Figure 2.11) on the Indicating transmitter front panel and by
Serial number on sensor label (Figure 2.10, Figure 2.12), e.g. 2003E2C-5604. The sensor type, e.g. 50, is
stamped on the probe tip (see Section 2.2.1 for model codes).
PROCESS REFRACTOMETER
IT - RE - GP S/N:2003E20-5604
100 - 115/220 - 240 V AC, 50/60 Hz, 20VA
TAG:
Figure 2.11 Identification label,
Indicating transmitter. Figure 2.12 Identification label, Sensor.
For intrinsically safe sensor label,
see Figures 12.11 and 12.12.