K-Patents PR-01-S - Manual (Page 81)

INSTRUCTION MANUAL FOR K-PATENTS PR-01-S (-AX/FM/CS) DOCUMENT/REVISION No. INM 1/14
Effective: May 15, 2009
79
8.4. PRISM WASH WITH FLOW THROUGH CELLS
If you need to mount a refractometer with prism wash nozzle in a line smaller than diameter 80 mm (3”), a
flow through cell is provided by K-Patents.To select a correct flow through cell, see Figure 8.40.
Flow cells PR-3350 (Sandvik), PR-3351 (DIN), PR-3352 (ANSI) and PR-3353 (JIS) can be equipped with
one of the following nozzles:
– PR-3354 (water)
– PR-3355 (steam)
– PR-3356 (pressurized water)
For dimensions see Figure 8.41.
The nozzles can be changed later if the process medium changes or the wash needs to be modified (Section
8.1).
If a wash nozzle is required with a Sanitary 3A-clamp 4” sensor, a PR-3402 sanitary flow through cell with
a steam nozzle PR-3355 is recommended, Figure 8.40.
For connection of the wash components see Section 8.2.
For recommended wash pressures and times see Section 8.5.