Lencore Spectra i.Net: Sound Manager - Manual (Page 26)

Figure 11
6. When finished selecting OP/Channels or setting Volume/Contour, click the
floppy disk symbol in the Groups area to save the group settings as shown in
Figure 12 below.
Figure 12
7. The Group is now saved and the selected OPs channels highlighted have
turned from Green to Yellow, indicating that the group has been saved as
shown in Figure 13.
The information contained herein is proprietary to Lencore Acoustics Corp. and copyright protected. No part of this manual can be copied,
used or distributed without prior authorization from Lencore Acoustics Corp. © Copyright 2010 23
V 1.9