ROTEL RDV-1092 - Manual (Page 23)

23 23 English
• During playback, press the A-B button at
the desired starting point. The Status Bar
appears “Loop Start Set” and the starting
point, Point A, is memorized.
• As playback continues, press the A-B
button at the desired ending point for the
selection, “B”. The Status Bar appears
showing “Loop End Set” and the ending
point, Point B, is memorized. The ending
point must be in the same Title or Track
as “A”.
• Repeat play of the marked selection begins
automatically and continues indefinitely.
• Press STOP to end play and cancel the
A-B REPEAT feature. You can also cancel
by pressing A-B button again. The Status
Bar appears showing “Loop Off”.
NOTE
: If the Status Bar does not appear, A-B
REPEAT is not available for the disc.
Random Play
The Random Play feature is available for all
discs. The feature plays all of the tracks on
the disc once in random order.
To begin Random Play, press the RANDM
button on the remote. The Status Bar appears
showing “Random On”.
To cancel Random Play, press the RANDM
button on the remote again. The Status Bar
appears showing “Random Off”.
Program Play
Program Plays allows you to select tracks, in
any order, on an Audio CD disc. The tracks
are then played in the programmed order.
To use program play:
1. Press the PROG button on the remote. A
list of tracks on the Audio CD appears on
the TV monitor.
2. Use the CURSOR buttons to highlight
the first track desired. Select it for program
play with the CURSOR
buttons.
3. Repeat Step 2 until all of the desired tracks
are selected in the desired order. If you
reach the memory limit, no more tracks
can be added to the program list.
4. After selecting the desired tracks, press
the PLAY or ENT button to begin pro-
grammed play.
To clear the program list, press the MENU
button while the program list is displayed. If
the program list is not displayed, press the
MENU button twice.
NOTE
: If a program play list is active for a CD
disc, the Repeat ALL, Repeat 1, and Random
play features described previously will repeat
or play random selections from the program
list instead of the entire disc.
Playing MP3 discs
The RDV-1092 can play MP3 files, from most
CD-R and CD-RW discs. These discs, often
recorded on computer drives, have a file
structure similar to computer discs, with files
stored in folders.
Here are a few tips when recording your
own discs:
• Select “ISO 9660” as the disc format.
• Record MP3 files at a 44.1 kHz sampling
rate, using the 128 kbps data transfer rate.
Files must have an .MP3 file extension.
• The player does not support “packet writ-
ing (UDF file)” discs.
• The player does not support the ID3
tag.
• The player supports discs recorded with
multiple sessions.
• Some discs may not play due to disc char-
acteristics or recording conditions.
Selecting files for playback and other features
are made using a special URD menu.
URD menu
Whenever a disc containing MP3 files is insert-
ed in the RDV-1092 or when the PLAY button
is pressed, the URD menu appears, showing
the available files on the TV monitor:
01 let’s groove.mp3
URD
02 stayin alive.mp3
03 john blaze.mp3
04 beat it.mp3
05 truckin.mp3
06 the good die young.mp3
07 numb.mp3
08 its been a while.mp3
If the files on the disc are grouped into fold-
ers, display will look as follows:
Folder 1
URD
Folder 2
Folder 3
Folder 4
To select a Folder: Use the CURSOR
buttons to highlight the desired folder. Press
the ENT button and that list of files in that
folder are displayed.
To select a Track: Use the CURSOR
buttons to highlight the desired track.
To start playback from the selected
Track: Press the ENTER button.
NOTE
: Pressing PLAY during playback be-
gins the current Track from the beginning.
High speed forward or reverse play using
the SEARCH
buttons.
Repeat Play
When playing an MP3 disc, you can repeat
a single Track, all the Tracks in the current
Group, or all of the Tracks on the disc.
To begin Repeat Play: Press the REPEAT
button on the remote control. Each press of
the button advances to the next REPEAT mode
as follows:
REPEAT DISC ➪ REPEAT 1 ➪ REPEAT OFF
The repeat indicator appears in the front
panel display, showing the repeat setting.
The status bar on the TV monitor also shows
the current repeat setting.
To stop Repeat play: Press STOP to
stop playback. Playback stops but repeat
mode remains active. To cancel repeat mode,
press the REPEAT button until the OFF mode
is selected.