Teo IP Phone 7810-TSG Installation - Manual (Page 31)

Installation Options
13-280138 Rev. H Page 31
RTP PORT=16384
DELETE CLEAR 123
SIP PORT=5060
DELETE CLEAR 123
SIP PORT=5060
CHANGE
RTP PORT=16384
CHANGE
Enter or edit the domain name or IP address with the dial pad (maximum 128
characters). Character entry is explained on page 18.
When finished, press the OK key to return to the SIP Phone Configuration menu.
PORT
Select CHANGE.
Enter or edit the proxy port number with the dial pad (maximum 5 numeric
characters). Character entry is explained on page 18.
When finished, press the OK key to return to the SIP Phone Configuration menu.
SIP signaling will use the new port number on the next call or registration attempt.
RTP (RTP Start Port)
Select CHANGE.
Enter or edit the RTP start port number with the dial pad (maximum 5 numeric
characters). Character entry is explained on page 18.
When finished, press the OK key twice to return to the SIP Phone Configuration
menu. SIP signaling will use the new port number on the next call or registration
attempt.