Teo IP Phone 7810-TSG Installation - Manual (Page 72)

Teo IP Phone 7810 TSG Series Installation Instructions
Page 72 13-280138 Rev. H
SYSLOG (Logging Server Address)
EDIT
OPTION
NONE (Disable Syslog Messages)
BASIC (Record Error Logs)
QoS (Record Error Logs and QoS statistics)
CFG (Syslog Server IP Address Configuration)
DHCP4
STATIC
MAC (Ethernet MAC Address)
SIP ( Session Initiation Protocol Settings) ...................................................................... page 30
PHONE ( SIP Phone Configuration)
DOMAIN ( Phone Domain Name)
PORT ( Phone SIP Port Number)
RTP (Phone RTP Start Port Number)
PROXY ( SIP Proxy)
ID (SIP Proxy Server Name or IP Address)
PORT (SIP Proxy Server Port Number)
REGSTR ( SIP Registration)
ENABLE
ENABLE (Enable SIP Registration)
DISABLE (Disable SIP Registration)
ID (SIP Registrar Name or IP Address)
PORT (SIP Registrar Port Number)
MWI (Message Summary Event Subscription for MWI)
OFF
ON
QoS (Quality of Service Options) ................................................................................. page 34
L2 (Layer 2 801.2Q)
OFF/ON
PHONE
VOICE (Voice Packet Priority)
SIGNAL (Signaling Packet Priority)
ID (Phone VLAN ID)
PC
CLEAR
NONE
L3 (Layer 3 DiffServ)
VOICE (Voice Differentiated Services Code Point)
SIGNAL (Signaling Differentiated Services Code Point)