Thinklogical Secure Console Server Manual - Manual (Page 29)

S e c u r e C o n s o l e S e r v e r M a n u a l , R e v . K , J u l y , 2 0 1 3 Page 29
Network IP Address
SCS Front Panel Display for Network Programming mode
Press the Enter button to continue.
SCS Front Panel Display showing the current IP Address
The current IP Address will be displayed with leading zeroes. The factory default is 10.9.8.7.
If you do nothing, the display will revert to the previous display after 30 seconds and no
changes will be made. To change the IP Address press the Enter button.
SCS Front Panel Display showing Edit IP Address
A cursor appears under the first character of the existing address. Press the Left or Right
arrow button to move the cursor to the first digit to be changed. To change a digit, use the Up
or Down arrows.
!
Note: Ignore any leading zeroes in the display entry. The SCS will adjust for
them and will not store the leading zeroes when saving the data.
As soon as you change a digit an asterisk (*) will appear at the top-right indicating that a
parameter has changed. Input the complete address.
SCS Front Panel Display (example) with an Asterisk indicating a change