Thinklogical Secure Console Server Manual User Manual
Page 75
S e c u r e C o n s o l e S e r v e r M a n u a l , R e v . K , J u l y , 2 0 1 3
Page 75
mod
Modulation
Possible rates (bps)
1
V92
2
V92
56000, 54666, 53333, 52000,
50666, 49333, 48000, 46666, 45333, 44000,
V903
V.90
56000, 54666, 53333, 52000,
50666, 49333, 48000, 46666, 45333, 44000,
V34
V.34
33600, 31200, 28800, 26400,
24000, 21600,19200, 16800, 14400, 12000,
V32B
V.32bis
14400, 12000, 9600, 7200, or 4800
V32
V.32
9600 or 4800
V22B
V.22bis
2400 or 1200
V22
V.22
1200
V23C
V.23
1200
V21
V.21
300
Bell212A
Bell 212A 1200
Bell103
Bell 103
300
Notes:
1.
See optional <automode>, <max_rate>, and
<max_RX_rate> subparameters.
2.
Selects V.92 modulation as first priority. If a V.92 connection
cannot be established, the modem attempts V.90, V.34,
V.32bis, etc.
automode
An optional numeric value that enables or disables automatic modulation negotiation using V.8 bis/V.8 or V.32 bis
Annex A. Automode is disabled if values are specified for the max_rate and max_rx_rate parameters. The options are:
0
Disable automode
1
Enable automode (default)
max_rate
An optional number that specifies the highest rate at which the modem may establish an upstream (transmit)
connection. The value is decimal coded in units of bps, for example, 33600 specifies the highest rate to be 33600 bps.
0
Maximum rate determined by the modulation selected in mod (default).
300 –3 36 00
Maximum rate value limited by the modulation selected in mod. For valid max_rate values for each mod
value, see the following table.
mod value
Valid max_rate values (bps)
V92, V90, V34
31200,
28800,
26400, 24000, 21600,19200, 16800,
14400,
12000,
9600,
7200,
V32B
19200,
16800,
14400, 12000, 9600, 7200, 4800
V32
14400,
12000,
9600, 7200, 4800
V22B
2400
V22, V23C, Bell212A
1200
V21, Bell103
300
ma x_r x_r ate:
An optional number that specifies the highest rate at which the modem may establish a downstream
(receive) connection. The value is decimal coded in units of bps, e.g., 28800 specifies the highest rate to
be 28800 bps.
0
Maximum rate determined by the modulation selected in
mod
(default).
300–56000
Maximum rate value limited by the modulation selected in
mod.
See “Possible rates” in the
mod
table.
Command:
+PCW=n
Call Waiting Enable
Values:
n = 0, 1, or 2
Default:
2