Thinklogical Secure Console Server Manual - Manual (Page 32)

S e c u r e C o n s o l e S e r v e r M a n u a l , R e v . K , J u l y , 2 0 1 3 Page 32
Exit to Main Menu
You will now be prompted to Exit to the Main Menu. Press Enter to continue.
SCS Front Panel Display exiting the LCD Mode
You are given the choice to Save your changes or to Cancel them.
SCS Front Panel Display to Save or Cancel Changes
Press Enter to save your network changes or press the Up arrow to discard them. When
you have completed the changes, the system must restart the Network Daemon. (The
Network Daemon periodically connects to the network to check for updates and
notifications.) This process will be displayed on the front panel display. The display will
revert to a normal display when the network is restored.
SCS Front Panel Display - Saving and Restarting
When the system has restarted the network services, the following is displayed:
Returned to normal SCS Front Panel Display
To permanently save your new Network settings in the system, you must use the SAVE
command to write the values to the Compact Flash memory.
!
NOTE: If the system loses power before using the command-line SAVE
command, the front-panel-entered network parameter changes will be lost.