Thinklogical Secure Console Server Manual - Manual (Page 45)

S e c u r e C o n s o l e S e r v e r M a n u a l , R e v . K , J u l y , 2 0 1 3 Page 45
Default Front Panel Display,
The front panel will display system messages during events such as reboot or save, but will
return to the default display following these events.
7.7.1 Display Mode Parameters
The various LCD Display modes are controlled by entries maintained in the file:
/etc/sysconfig/lsi
• LCD_LINE_1=
• LCD_LINE_2=
• LCD_DISPLAY_SETTING=
• LCD_LINE_1= and LCD_LINE_2= (allows text entry of up to 24 characters to be displayed)
• LCD_DISPLAY_SETTING= (can be set to EDIT [default], VIEW, or OFF)
7.7.1.1 Edit
The Edit mode ( LCD_DISPLAY=EDIT) allows the front panel display to show the current display
information and allows anyone to use the front panel display to change the network parameters
(IP Address, Net Mask, and Gateway).
7.7.1.2 View
The View mode ( LCD_DISPLAY=VIEW) allows the front panel display to show the current
information, but disables editing using the front panel buttons. This prohibits unauthorized
changes to your network settings from the front panel.
7.7.1.3 LINE_1=
LINE_1= allows the user to customize data on the upper line of the display. The root user may
enter a left-justified text line of up to 24 characters to replace the SCS Host-name.
LINE_1 Changed in SCS Front Panel Display,
7.7.1.4 LINE_2=
LINE_2= allows the customer to customize data on the lower line of the display. The root user
may enter a left-justified text line of up to 24 characters to replace the clock/date display.