Triplett CamView PTZ – PN: 8000 - Manual (Page 14)

Page 12
The CamView is shipped with the battery disconnected to prevent any battery
drain that may reduce the battery life. Prior to the use of the instrument, the bat-
tery wires inside the battery compartment must be connected together. Open the
battery compartment. Observing the proper polarity (red wire to red wire, black
wire to black wire), connect the battery wires and replace
the cover on the battery compartment.
2.4 Connecting and Charging the Battery
There is no need to unplug the battery if the CamView is being used regularly
(at least once every few weeks). If the CamView will be unused for more than 1
month, unplug the battery for storage.
For first time usage, it is recommended that the battery be ‘conditioned’ by
operating the CamView until it turns itself off. This will provide the best battery
life in the coming months. If the Auto Power Off feature is activated, it may be
necessary Disable it to allow the product to run until the battery is depleted.