Triplett CamView PTZ – PN: 8000 - Manual (Page 22)

Page 20
3.3 Video Monitor Mode/ PTZ Controller Parameter Setting Cont.
E. Pan speed
Move the cursor to “Pan speed”. Select a value for the Pan
speed from 0 to 63.
Note: The range of adjustment can change depending on the
camera.
F. Tilt Speed
Move the cursor to “Tilt Speed”. Select a value for the Tilt
speed from 0 to 63.
Note: The range of adjustment can change depending on the
camera.
G. Set ps (Setup Preset)
Move the cursor to “Set ps”. Choose a number from 0 to 127 to
identify the preset location.
H. Get ps (Go to Preset)
Move the cursor to “Get ps”. Select a preset number that will be
activated.