Airlink AML001 - Manual (Page 47)

PCI Modem Card User's Manual
46
7 34666 kbits/s. 19 50666 kbits/s.
8 36000 kbits/s. 20 52000 kbits/s.
9 37333 kbits/s. 21 53333 kbits/s.
10 38666 kbits/s. 22 54666 kbits/s.
11 40000 kbits/s 23 56000 kbits/s.
+A8E=<v8o>,<v8a>,<v8cf>,<v8b>—V.8 and V.8 bis Operation Controls
Use this command to set the control parameters for early call negotiation
through V.8 and V.8 bis. +A8E* may also be used as an action command to
reinitiate V.8 or V.8 bis if an earlier attempt to use either protocol has failed.
<v8o> enables or disables DCE-controlled V.8 origination negotiation;
<v8a> enables or disables DCE-controlled V.8 answer negotiation; <v8b>
disables V.8 negotiation or sets it to DCE controlled or DTE controlled
negotiation.
The <a8cf> parameter sets the V.8 CI signal call function to the value
specified. The valid range for this parameter is 0—FF, with a default of 0xC1.
Valid <v8o> Values:
1
Enables DCE-controlled V.8 origination negotiation (default).
6 Enables DCE-controlled V.8 origination negotiation, issue
+A8x indications.
Valid <v8a> Values
1
Enables DCE-controlled V.8 answer negotiation (default).
5 Enables DCE-controlled V.8 answer negotiation, issue +A8x
indications.
Valid <v8cf> Values
1
Enables DCE-controlled V.8 origination negotiation.
6 Enables DCE-controlled V.8 origination negotiation, issue
+A8x indications.
Valid <v8b> Values
0
Disables V.8 negotiation.
1 Enables DCE-controlled V8 bis negotiation (default).